Crown Audio Macro-Tech 2400 Two-Channel Power Amplifier 1650W @ 8 Ohms - USED

Key features: 

• Patented ODEP (Output Device Emulation Protection) circuitry compensates for overheating and overload
• IOC (Input/Output Comparator) circuitry immediately indicates any distortion exceeding 0.05% giving dynamic proof of performance
• Two mono modes (Bridge-Mono and Parallel-Mono) for driving a wide range of load impedances and cable lengths
• Full protection against shorted outputs, open circuits, mismatched loads, general overheating, high frequency overloads. Loudspeaker protection against low frequency and DC output.
• Plug-in PIP card facility

Output power: 1100W continuous @2Ω 20Hz-20kHz
                     800W continuous @4Ω 20Hz-20kHz
                     520W continuous @8Ω 20Hz-20kHz
(Bridge mono) 1650W continuous @8Ω 20-20kHz
Frequency response: 20hz - 20kHz ±0.1dB @1W
Phase response: ±10° from 10Hz - 20kHz @1W
Signal to Noise Ratio: >105dB 20Hz - 20kHz
                        below rated output at 26dB gain
THD: <0.05% from 20Hz to 1kHz and increasing linearly to <0.1% at 20kHz, delivering full rated power into 8 Ohms per channel
IM Distortion: <0.05% from 10mW to full rated
                    output at 26dB gain
Damping factor: >1000 from 10Hz to 400Hz
Slew rate: >13 volts per microsecond (stereo)
Voltage gain: 20:1 ±3% or 26 dB ±0.25dB
Mains power: 100/120/220/230/240 VAC 50/60Hz
Dimensions: 2u standard rack mount x 406mm deep
Weight: 23.5kg